2.5用於絲網印刷的m長度傳送帶乾燥機

描述

在我們印刷 T 卹之後, 它需要乾燥. 墨水是一種液體，在變乾之前是流動的. 自然乾燥方法往往較慢. 印刷行業用, 我們通常使用 T卹輸送機烘乾機. 量產中, 篩網輸送乾燥機 可以快速烤衣服. 所以大大提高了生產效率.

傳送帶式乾燥機絲網印刷是隧道爐烘箱的一種. 篩網輸送乾燥機包括網帶輸送機和加熱烘箱. 它不僅可以作為 T 卹輸送機烘乾機, 也可以烘乾其他絲印產品. 例如, we usually use this infrared mesh belt dryer to dry glass and plastic.

您是否需要用於絲網印刷的傳送帶式乾燥機?

如果在烘箱中烘烤絲網印刷產品, 會有以下問題:

首先, 低容量. 以玻璃面板為例. 用烤箱可以放 6 層, 每一層 22 件. 乾燥溫度應達到 180 度數. 最短加熱時間為 35 分鐘. 8 幾個小時不停的工作只能烤 1716 產品件.

第二, 工作量大. 操作者需要填充一層然後放入烘箱. 烘烤後, 必須依次取出. 這些動作需要重複. 噸

三是產品乾燥後的高溫. 操作者有被燙傷的可能. 所以比較危險.

為了克服這些缺點, 它需要一個傳送帶乾燥機絲網印刷.

T卹傳送帶烘乾機是如何工作的?

通過在烘箱中設置網帶式輸送機, 它可以使絲印產品自動干燥. 使用T卹傳送帶烘乾機時, 將絲網印刷產品放置在輸送線上. 網帶將產品輸送到篩網傳送帶烘乾機進行烘烤. 乾燥過程產生的廢氣通過排氣口排出. 最後, 乾燥的產品通過網帶移動到出口區.

此款傳送帶式烘乾機絲印使用紅外線加熱燈. 此外, the wind impeller can make the heat air to spread quickly throughout the oven. The temperature in the screen conveyor dryer is even. 除了, the thermostat can precisely control the temperature of t-shirts conveyor dryer. 因此, this will ensure baking quality.

Technical specification of this conveyor belt dryer screen printing

溫馨提示: we can customize the conveyor belt dryer screen printing as customers’ specific sizes & requirements.

Characteristics of infrared screen conveyor dryer

1. Tunnel dryer screen printing adopts hot air circulation method (convection heating). The temperature inside the oven is uniform. 除了, it heats up quickly.

2. The conveyor belt dryer screen printing is with a thermostat. So customer can adjust the temperature freely. 所以, it can adapt to the baking of different screen printing products.

3. The mesh belt conveyor is equipped with inverter. So you can adjust the running rate according to the actual needs. 最後, it can control the drying time.

4. The tunnel t shirt conveyor dryer oven is filled with insulation cotton, which can effectively reduce heat dissipation.

5. This screen conveyor dryer is with adjustable end shield. Not only easy to feed and discharge, but also can block the diffusion of heat and ink vapor. So it can reduce the harm of ink vapor to human body.

How to operate the t shirt conveyor dryer rightly?

Before operating screen conveyor dryer, pls check the following items:

1. check whether flammable and explosive materials are above and near the conveyor belt dryer screen printing;

2. check whether the wind impeller is operating normally.

3. and check if the dryer mesh belt is running normally.

4. if it is a new conveyor dryer, it is best to test it firstly. This determines the best drying temperature and time.

Use the tunnel dryer screen printing:

After confirming that there is no abnormality in the drying oven, turn on the power switch. Then operate the control cabinet.

下一個, turn on the start general switch — conveyor switch — heating switch — wind motor switch in turn.

After the conveyor furnace heating normally, operators should immediately check the air motor switch for abnormalities.

Set the mesh belt dryer temperature according to the product requirements. 同時, set the belt conveyor speed.

Operators should frequently inspect the working condition of screen conveyor dryer.

Remember not to put your hand on the chain or gear part when the t shirt conveyor dryer is running.

溫馨提示:

Check the heat tubes of conveyor belt dryer screen printing daily to make sure it is normal.

此外, every 2 days, use the thermometer to test whether the temperature is normal.

Take care to keep the screen t shirt conveyor dryer 乾淨的.