描述
這 微型傳送帶 係雙向小傳送帶. 首先, 類似于定時帶傳送帶, 這 微型輸送機 有兩條皮帶來運輸貨物. 講真, 這 微型傳送帶 係畀我哋嘅俄羅斯客戶嘅. 雙通道迷你傳送帶嘅應用適用於砖厂. 小型傳送帶系統上有兩個木架. 然後機械人抓起磚頭放在木架上. 因此,呢個微型傳送帶推出木架 & 來自機械人區域嘅磚塊. As the mini conveyor 製造者, 我哋可以設計和生產多種小型傳送機作為客戶’ 要求.
It will be hanged ( without legs ) on robot frame. Besides it has 2 channels ( for working with left and right robot-half ). And it needs to use thick materials to be strong enough for transport wooden racks 50 公斤. Customer said their brick factory and environment is very dusty.
The Design Features of This Miniature Conveyor Belt:
1. 首先, 有兩個傳送帶. 因此,它#8217與普通傳送機有點不同.
2. 其次, 有一個安裝支架嚟保持電機. 因為佢哋嘅設備空間有限, 電機喺高距離外.
3. 第三, 因為貨物運輸量好大, we use 5mm thickness rubber belts and 3mm thickess frame. 因此, 它更耐用,壽命更長,#8217.
4. 然之後, 都由於高載荷要求, 有兩個鋼板焊接喺輸送機嘅底部.
5. 最後, the most parts are connected each other by bolts. So it’s easy to install and maintainan the small conveyor belt.
此微型傳送帶嘅技術參數:
1. Miniature conveyor length: 810毫米, and belt width: 200毫米;
2. Small conveyor belt: 5mm thickness black rubber belt;
3. Frame and brackets material: 塗碳鋼;
4. Load-bearing capacity: 50KG for each micro conveyor belt;
5. 發動機: CPG brand 400W gear motor with speed controller;
6. Mini conveyor speed: 0.5米/秒;
7. Motor bracket height: 600毫米;
8. The drive chain is protected by a conver;
9. The driving roller: φ50mm seamless steel roller with textures, and driven roller is also φ50mm seamless steel roller.
10. Support plate: there are two bent galvanized sheets under the two belts. 此外, there are two 3mm thickness steel plates under the miniature conveyor.
How does this miniature conveyor work?
講真, the working principle of this micro belt conveyor is similar to other small conveyor belts. 首先, the external motor drive the transmission chain. The only difference is that the chain does not directly drive the driving roller. Instead, it directly drives the shaft in the middle of the two micro conveyor belts. The shaft connects two bearing seats. Because the bearing seats connect two driving roller, the shaft can drive the two rollers. And then two driving rollers make the two belts run at the same time. You can adjust the conveyor speed.
Why it needs the driving roller with texture?
Miniature conveyor belt often has the phenomenon of belt slippage. So in order to avoid it, it uses this kind of rollers. The texture on the roller surface can increase friction. Then it can avoid belt slipping. 此外, the support plate under the belts can also increase friction. When designing and using micro conveyors, we must avoid belt slippage. 否則, the belt is prone to wear or breakage. Eventually it will affect the normal operation of the conveyor.
常見問題
第1季度: Are your miniature conveyor belt strong?
A1: 確定. In order to ensure its durability, we uses 5mm thickness rubber belt. And the frame uses 3mm thickness steel. It’s thicker than normal mini conveyor.
第2季度: How to adjust belt tension?
A2: There are tension adjustment mechanisms on the two sides of the micro conveyor. They connect the two driven rollers. When adjusting, it can change the roller distance, so it can achieve to adjust belt tension.
第3季度: How do I solve the problem of belt deviation of small conveyor?
A3: It’s same to adjust belt tension. If the belt deviation occurs at the lelft side, then adjust the left tension adjustment mechanism.
第4季度: How long is the warranty time of your mini conveyor?
第5季度: 我哋嘅保修時間 微型傳送帶 belt is one year.
評論
未有評論.