10m Length Low Temperature Conveyor Curing Dryer Oven

Description

This belt conveyor oven has 10 meters length and 5 heating zones. It is a low temperature industrial conveyor dryer. And it adopts the green PVC belt to transport the goods. The maximum temperature of the PVC belt is 80°C. So we usually use this conveyor drying oven to heat & cure ink and glue for electronics, screen printing, plastic & rubber & silicone painting, etc.

The working principle of continuous belt conveyor oven

Firstly, the infrared heaters work and impeller fans spread the heat to the heating zones. After preheat, industrial conveyor dryer heats up to the set temperature. Then the PVC belt convey the products into the drying zones. Hot air circulation makes the temperature in conveyor drying oven uniform. This is an important indicator to ensure the quality of product coatings.

Different heating zones, different temperature control systems. So it can flexibly meet the requirements of the production process. Because of RKC thermostat, the belt conveyor oven can accurately control the temperature.

Specifications of conveyor drying oven

1. The stands of belt conveyor oven are 40*40mm square tubes with adjustable feet.

2. Conveyor belt: PVC belt, width 600mm, belt thickness 2.0mm.

3. Power part: 1.5KW three-phase motor, with frequency conversion speed regulation (0~6 meters per minute adjustable).

4. The outer cover of conveyor drying oven is made of cold plates. Effective dimensions of the inner zone: width 600 mm, height 50 mm.

5. The inner liner materials are galvanized sheet. The entrance and exit height is 100mm (customizable).

6. The use of aluminum silicate cotton has good thermal insulation effect.

7. The heating elements use the infrared quartz heater tube with a power of 1KW.

8. Each cover of industrial conveyor dryer can be raised independently for easy maintenance.

9. Tunnel oven color: computer white (customizable).

Features of industrial tunnel drying oven

1. Firstly, conveyor drying oven can achieve sectional control (when rising to set temperature, you can turn off several sections of the heating tubes at will to reduce the heating power. So it can save the power);

2. Secondly, the belt conveyor oven adopts intelligent temperature controller. At the same time, with SSR solid-state relay output, it can precisely control the accuracy of temperature. In addition, there is an over-temperature protection function. Therefore, when reaching the set temperature, it will automatically stop heating.

3. Thirdly, simple operation, convenient maintenance and adjustment. Low noise and high reliability. Low cost, low energy consumption and high production efficiency.

4. Finally, this industrial conveyor dryer is with exhaust pipe. Tunnel oven are often used for drying and curing SMT components, printed circuit boards, electronic products, etc. So it can discharge the exhaust gas generated during the drying process.

FAQ

Q1: How long is the service life of the heating tube?

A1: For our belt conveyor oven, the service life time of heater can be up to 2~3 years.

Q2: What kind of heating element does your conveyor drying oven use?

A2: Usually, our continuous drying oven uses the infrared heating lamps. Of course, we can also supply the stainless steel heater or heater with heat sink.

Q3: What brand of thermostat does your tunnel dryer use?

A3: Our industrial conveyor dryer usually adopts the RKC brand thermostat.

Q4: What about the warranty time of your conveyor belt dryer?

A4: The warranty time of our belt conveyor oven is one year.