Two-way Mini Small Belt Conveyor na may Panlabas na Motor

Paglalarawan

Ito maliit na conveyor ay isang two-way maliit na conveyor belt. Una, katulad ng conveyor ng timing belt, ito micro conveyor mayroong dalawang sinturon upang magdala ng mga paninda. Sa totoo lang, ito micro conveyor belt ay para sa aming Russian customer. Ang aplikasyon ng dalawang-channel na mini conveyor ay para sa brickyard. Mayroong dalawang mga kahoy na racks sa maliit na conveyor system. At pagkatapos ay dinakip ng robot at inilalagay ang mga brick sa sahig na gawa sa kahoy. Kaya't ang pinaliit na conveyor belt na ito ay itulak ang mga kahoy na racks & brick mula sa kanilang robot zone. Bilang ang mini conveyor tagagawa, maaari kaming mag-disenyo at makagawa ng maraming uri ng maliliit na conveyor machine bilang mga customer’ mga kinakailangan.

It will be hanged ( without legs ) on robot frame. Besides it has 2 channels ( for working with left and right robot-half ). And it needs to use thick materials to be strong enough for transport wooden racks 50 kg. Customer said their brick factory and environment is very dusty.

The Design Features of This Miniature Conveyor Belt:

1. Una, mayroong dalawang conveyor belt. Kaya't medyo kakaiba ito sa normal na conveyor machine.

2. Pangalawa, mayroong isang mounting bracket upang hawakan ang motor. Dahil may limitasyon sa puwang ng kanilang kagamitan, ang motor ay panlabas sa mataas na distansya.

3. Pangatlo, sapagkat mabigat ang naihatid na paninda, we use 5mm thickness rubber belts and 3mm thickess frame. Ganito, mas matibay ito at may mahabang buhay.

4. Tapos, dahil din sa mataas na mga kinakailangan sa pagdadala ng karga, mayroong dalawang bakal na plato na pinagsama sa ilalim ng conveyor.

5. Sa wakas, the most parts are connected each other by bolts. So it’s easy to install and maintainan the small conveyor belt.

Mga Teknikal na Parameter ng Micro Conveyor Belt na ito:

1. Miniature conveyor length: 810mm, and belt width: 200mm;
2. Small conveyor belt: 5mm thickness black rubber belt;
3. Frame and brackets material: pininturahan ang carbon steel;
4. Load-bearing capacity: 50KG for each micro conveyor belt;
5. Motor: CPG brand 400W gear motor with speed controller;
6. Mini conveyor speed: 0.5m/s;
7. Motor bracket height: 600mm;
8. The drive chain is protected by a conver;
9. The driving roller: φ50mm seamless steel roller with textures, and driven roller is also φ50mm seamless steel roller.
10. Support plate: there are two bent galvanized sheets under the two belts. Bukod sa, there are two 3mm thickness steel plates under the miniature conveyor.

How does this miniature conveyor work?

Sa totoo lang, the working principle of this micro belt conveyor is similar to other small conveyor belts. Higit sa lahat, the external motor drive the transmission chain. The only difference is that the chain does not directly drive the driving roller. Instead, it directly drives the shaft in the middle of the two micro conveyor belts. The shaft connects two bearing seats. Because the bearing seats connect two driving roller, the shaft can drive the two rollers. And then two driving rollers make the two belts run at the same time. You can adjust the conveyor speed.

Why it needs the driving roller with texture?

Maliit na conveyor belt often has the phenomenon of belt slippage. So in order to avoid it, it uses this kind of rollers. The texture on the roller surface can increase friction. Then it can avoid belt slipping. Bukod dito, the support plate under the belts can also increase friction. When designing and using micro conveyors, we must avoid belt slippage. Kung hindi man, the belt is prone to wear or breakage. Eventually it will affect the normal operation of the conveyor.

FAQ

Q1: Are your miniature conveyor belt strong?
A1: Oo naman. In order to ensure its durability, we uses 5mm thickness rubber belt. And the frame uses 3mm thickness steel. It’s thicker than normal mini conveyor.

Q2: How to adjust belt tension?
A2: There are tension adjustment mechanisms on the two sides of the micro conveyor. They connect the two driven rollers. When adjusting, it can change the roller distance, so it can achieve to adjust belt tension.

Q3: How do I solve the problem of belt deviation of small conveyor?
A3: It’s same to adjust belt tension. If the belt deviation occurs at the lelft side, then adjust the left tension adjustment mechanism.

Q4: How long is the warranty time of your mini conveyor?
Q5: The warranty time of our maliit na conveyor belt is one year.