Конвейери хурди дуҷонибаи камарбанди хурд бо муҳаррики беруна

Тавсифи

Ин конвейери миниётура як лентаи хурди дуҷониба мебошад. Аввалан, монанд ба конвейери тасмаии вақт, ин конвейери хурд барои кашондани бор ду тасма дорад. Дар асл, ин лентаи хурд барои фармоишгари руси мост. Татбиқи конвейери мини ду каналӣ барои заводи хишт. Дар системаи конвейери хурд ду рафи чӯбӣ гузошта шудааст. Ва он гоҳ робот хиштҳоро мегирад ва ба рафҳои чӯбӣ мегузорад. Пас, ин тасмаҳои конвейери миниётура рафҳои чӯбро тела медиҳанд & хиштҳо аз минтақаи роботҳои худ. As the mini conveyor истеҳсолкунанда, мо метавонем бисёр намуди мошинҳои конвейери хурдро ҳамчун муштарӣ таҳия ва истеҳсол кунем’ талабот.

It will be hanged ( without legs ) on robot frame. Besides it has 2 channels ( for working with left and right robot-half ). And it needs to use thick materials to be strong enough for transport wooden racks 50 kg. Customer said their brick factory and environment is very dusty.

The Design Features of This Miniature Conveyor Belt:

1. Аввалан, ду тасмачарх вуҷуд дорад. Ҳамин тавр, он аз мошини конвейери муқаррарӣ каме фарқ мекунад.

2. Сониян, кронштейн васлкунанда барои нигоҳ доштани мотор мавҷуд аст. Зеро маҳдудияти фазои таҷҳизоти онҳо вуҷуд дорад, муҳаррик дар масофаи баланд беруна аст.

3. Саввум, зеро молҳои интиқолшаванда вазнинанд, we use 5mm thickness rubber belts and 3mm thickess frame. Ҳамин тавр, он пойдортар ва умри дароз дорад.

4. Баъд, инчунин аз сабаби талаботи баланди борбардор, ду табақи пӯлодие ҳастанд, ки ба поёни транспортёр кафшер карда мешаванд.

5. Ниҳоят, the most parts are connected each other by bolts. So it’s easy to install and maintainan the small conveyor belt.

Параметрҳои техникии ин камари конвейери хурд:

1. Miniature conveyor length: 810мм, and belt width: 200мм;
2. Small conveyor belt: 5mm thickness black rubber belt;
3. Frame and brackets material: пӯлоди карбон ранг карда шудааст;
4. Load-bearing capacity: 50KG for each micro conveyor belt;
5. Мотор: CPG brand 400W gear motor with speed controller;
6. Mini conveyor speed: 0.5m/s;
7. Motor bracket height: 600мм;
8. The drive chain is protected by a conver;
9. The driving roller: φ50mm seamless steel roller with textures, and driven roller is also φ50mm seamless steel roller.
10. Support plate: there are two bent galvanized sheets under the two belts. Ғайр аз он, there are two 3mm thickness steel plates under the miniature conveyor.

How does this miniature conveyor work?

Дар асл, the working principle of this micro belt conveyor is similar to other small conveyor belts. Пеш аз ҳама, the external motor drive the transmission chain. The only difference is that the chain does not directly drive the driving roller. Instead, it directly drives the shaft in the middle of the two micro conveyor belts. The shaft connects two bearing seats. Because the bearing seats connect two driving roller, the shaft can drive the two rollers. And then two driving rollers make the two belts run at the same time. You can adjust the conveyor speed.

Why it needs the driving roller with texture?

Miniature conveyor belt often has the phenomenon of belt slippage. So in order to avoid it, it uses this kind of rollers. The texture on the roller surface can increase friction. Then it can avoid belt slipping. Гузашта аз ин, the support plate under the belts can also increase friction. When designing and using micro conveyors, we must avoid belt slippage. Дар акси ҳол, the belt is prone to wear or breakage. Eventually it will affect the normal operation of the conveyor.

Саволҳои зиёд такрормешуда

Q1: Are your miniature conveyor belt strong?
A1: Албатта. In order to ensure its durability, we uses 5mm thickness rubber belt. And the frame uses 3mm thickness steel. It’s thicker than normal mini conveyor.

Q2: How to adjust belt tension?
A2: There are tension adjustment mechanisms on the two sides of the micro conveyor. They connect the two driven rollers. When adjusting, it can change the roller distance, so it can achieve to adjust belt tension.

Q3: How do I solve the problem of belt deviation of small conveyor?
A3: It’s same to adjust belt tension. If the belt deviation occurs at the lelft side, then adjust the left tension adjustment mechanism.

Q4: How long is the warranty time of your mini conveyor?
Q5: The warranty time of our конвейери миниётура belt is one year.