Transportues Mini Rrip i Vogël me dy drejtime me Motor të Jashtëm

Përshkrim

Kjo transportues në miniaturë është një rrip transportues i vogël me dy drejtime. Së pari, i ngjashëm me transportuesin e rripave të kohës, kjo transportues mikro ka dy rripa për të transportuar mallra. Në fakt, kjo rrip transportieri mikro është për klientin tonë rus. Zbatimi i mini transportuesit me dy kanale është për tulla. Ka dy rafte druri në sistemin e vogël transportues. Dhe pastaj roboti kap dhe vendos tullat në raftet prej druri. Kështu që kjo rrip transportieri miniaturë shtyn raftet e drurit & tulla nga zona e tyre e robotëve. As the mini conveyor prodhuesi, ne mund të projektojmë dhe prodhojmë shumë lloje të makinave të vogla transportuese si klientë’ Kërkesat.

It will be hanged ( without legs ) on robot frame. Besides it has 2 channels ( for working with left and right robot-half ). And it needs to use thick materials to be strong enough for transport wooden racks 50 kg. Customer said their brick factory and environment is very dusty.

The Design Features of This Miniature Conveyor Belt:

1. Së pari, ka dy rripa transportues. Pra, është pak më ndryshe nga makina normale transportuese.

2. Së dyti, ekziston një mbajtëse montimi për të mbajtur motorin. Për shkak se ka hapësirë ​​të kufizuar për pajisjet e tyre, the motor is external at high distance.

3. Së treti, because the conveyed goods is heavy, we use 5mm thickness rubber belts and 3mm thickess frame. Kështu, it’s more durable and has long lifetime.

4. Pastaj, also due to the high load-bearing requirements, there are two steel plates welded onto the bottom of the conveyor.

5. Më në fund, the most parts are connected each other by bolts. So it’s easy to install and maintainan the small conveyor belt.

Parametrat teknikë të këtij Rripi Mikro Transportues:

1. Miniature conveyor length: 810mm, and belt width: 200mm;
2. Small conveyor belt: 5mm thickness black rubber belt;
3. Frame and brackets material: çeliku i karbonit i pikturuar;
4. Load-bearing capacity: 50KG for each micro conveyor belt;
5. Motorri: CPG brand 400W gear motor with speed controller;
6. Mini conveyor speed: 0.5m/s;
7. Motor bracket height: 600mm;
8. The drive chain is protected by a conver;
9. The driving roller: φ50mm seamless steel roller with textures, and driven roller is also φ50mm seamless steel roller.
10. Support plate: there are two bent galvanized sheets under the two belts. Përveç kësaj, there are two 3mm thickness steel plates under the miniature conveyor.

How does this miniature conveyor work?

Në fakt, the working principle of this micro belt conveyor is similar to other small conveyor belts. Mbi të gjitha, the external motor drive the transmission chain. The only difference is that the chain does not directly drive the driving roller. Instead, it directly drives the shaft in the middle of the two micro conveyor belts. The shaft connects two bearing seats. Because the bearing seats connect two driving roller, the shaft can drive the two rollers. And then two driving rollers make the two belts run at the same time. You can adjust the conveyor speed.

Why it needs the driving roller with texture?

Miniature conveyor belt often has the phenomenon of belt slippage. So in order to avoid it, it uses this kind of rollers. The texture on the roller surface can increase friction. Then it can avoid belt slipping. Për më tepër, the support plate under the belts can also increase friction. When designing and using micro conveyors, we must avoid belt slippage. Përndryshe, the belt is prone to wear or breakage. Eventually it will affect the normal operation of the conveyor.

FAQ

P1: Are your miniature conveyor belt strong?
A1: Sigurisht. In order to ensure its durability, we uses 5mm thickness rubber belt. And the frame uses 3mm thickness steel. It’s thicker than normal mini conveyor.

P2: How to adjust belt tension?
A2: There are tension adjustment mechanisms on the two sides of the micro conveyor. They connect the two driven rollers. When adjusting, it can change the roller distance, so it can achieve to adjust belt tension.

P3: How do I solve the problem of belt deviation of small conveyor?
A3: It’s same to adjust belt tension. If the belt deviation occurs at the lelft side, then adjust the left tension adjustment mechanism.

P4: How long is the warranty time of your mini conveyor?
P5: Koha e garancisë sonë transportues në miniaturë belt is one year.