2.5Uscător cu bandă transportoare de lungime m pentru serigrafie

Descriere

După ce am tipărit tricouri, trebuie să-l usuce. Cerneala este un lichid și este fluidă până se usucă. Metodele naturale de uscare tind să fie mai lente. Pentru industria tipografică, de obicei folosim uscător transportor tricou. În producția de masă, uscător transportor ecran poate coace haine rapid. Deci, îmbunătățește foarte mult eficiența producției.

Serigrafia cu uscător cu bandă transportoare este un fel de cuptor cu cuptor tunel. Uscătorul de transport cu ecran include transportorul cu plasă și cuptorul de încălzire. Nu poate acționa doar ca un uscător transportor de tricouri, but also to dry other screen printing products. De exemplu, we usually use this infrared mesh belt dryer to dry glass and plastic.

Aveți nevoie de un uscător transportor pentru serigrafie?

Dacă coaceți produse de serigrafie în cuptorul cu uscător, there will be the following problems:

in primul rand, low capacity. Take the glass panel as an example. With the oven can be put 6 layers, each layer of 22 pieces. Drying temperature should reach 180 grade. The minimum heating time is 35 minute. 8 hours of non-stop work can only bake 1716 pieces of products.

În al doilea rând, the workload is large. The operator needs to fill a layer and then put it into the dryer oven. After baking, it has to be taken out in turn. These actions need to be repeated. oar Structura

The third is the high temperature of the products after drying. Operatorul are posibilitatea de a fi opărit. Deci este mai periculos.

Pentru a depăși aceste neajunsuri, are nevoie de o serigrafie cu bandă transportoare.

How does T-shirts conveyor dryer work?

By setting up a mesh belt conveyor in the oven, it can make the screen printed products dry automatically. When use t shirt conveyor dryer, așezați produsele serigrafiate pe linia transportoare. Centura de plasă va transporta produsele către uscătorul transportor de ecran pentru coacere. Gazele evacuate din procesul de uscare sunt evacuate prin orificiul de evacuare. In cele din urma, produsul uscat este deplasat prin centura de plasă în zona de ieșire.

This conveyor belt dryer screen printing uses the infrared heating lamp. în plus, the wind impeller can make the heat air to spread quickly throughout the oven. The temperature in the screen conveyor dryer is even. în afară de, the thermostat can precisely control the temperature of t-shirts conveyor dryer. Prin urmare, this will ensure baking quality.

Technical specification of this conveyor belt dryer screen printing

Notă amabilă: we can customize the conveyor belt dryer screen printing as customers’ specific sizes & cerințe.

Characteristics of infrared screen conveyor dryer

1. Tunnel dryer screen printing adopts hot air circulation method (convection heating). The temperature inside the oven is uniform. în afară de, it heats up quickly.

2. The conveyor belt dryer screen printing is with a thermostat. So customer can adjust the temperature freely. Prin urmare, it can adapt to the baking of different screen printing products.

3. The mesh belt conveyor is equipped with inverter. So you can adjust the running rate according to the actual needs. In cele din urma, it can control the drying time.

4. The tunnel t shirt conveyor dryer oven is filled with insulation cotton, which can effectively reduce heat dissipation.

5. This screen conveyor dryer is with adjustable end shield. Not only easy to feed and discharge, but also can block the diffusion of heat and ink vapor. So it can reduce the harm of ink vapor to human body.

How to operate the t shirt conveyor dryer rightly?

Before operating screen conveyor dryer, pls check the following items:

1. check whether flammable and explosive materials are above and near the conveyor belt dryer screen printing;

2. check whether the wind impeller is operating normally.

3. and check if the dryer mesh belt is running normally.

4. if it is a new conveyor dryer, it is best to test it firstly. This determines the best drying temperature and time.

Use the tunnel dryer screen printing:

After confirming that there is no abnormality in the drying oven, turn on the power switch. Then operate the control cabinet.

Următorul, turn on the start general switch — conveyor switch — heating switch — wind motor switch in turn.

After the conveyor furnace heating normally, operators should immediately check the air motor switch for abnormalities.

Set the mesh belt dryer temperature according to the product requirements. In acelasi timp, set the belt conveyor speed.

Operators should frequently inspect the working condition of screen conveyor dryer.

Remember not to put your hand on the chain or gear part when the t shirt conveyor dryer is running.

Notă amabilă:

Check the heat tubes of conveyor belt dryer screen printing daily to make sure it is normal.

în plus, every 2 zi, use the thermometer to test whether the temperature is normal.

Take care to keep the screen t shirt conveyor dryer curat.