2.5m Pengering Belt Konveyor Panjang untuk Percetakan Skrin

Penerangan

Selepas kami mencetak kemeja-T, ia perlu mengeringkannya. Dakwat adalah cecair dan cair sehingga kering. Kaedah pengeringan semula jadi cenderung lebih perlahan. Untuk industri percetakan, kita biasanya menggunakan pengering penghantar baju t. Dalam pengeluaran besar-besaran, pengering penghantar skrin dapat menyapu pakaian dengan cepat. Oleh itu, ia sangat meningkatkan kecekapan pengeluaran.

Conveyor belt dryer screen printing is a kind of tunnel furnace oven. The screen conveyor dryer includes the mesh belt conveyor and heating oven. It can not only act as t shirt conveyor dryer, but also to dry other screen printing products. Sebagai contoh, we usually use this infrared mesh belt dryer to dry glass and plastic.

Adakah anda memerlukan pengering penghantar untuk percetakan skrin?

Sekiranya membakar produk percetakan skrin di dalam oven pengering, akan ada masalah berikut:

Pertama, kapasiti rendah. Ambil panel kaca sebagai contoh. Dengan ketuhar boleh dimasukkan 6 lapisan, setiap lapisan 22 kepingan. Suhu pengeringan mesti mencapai 180 darjah. Masa pemanasan minimum adalah 35 minit. 8 jam kerja tanpa henti hanya boleh membakar 1716 kepingan produk.

Kedua, beban kerja adalah besar. Pengendali perlu mengisi lapisan dan kemudian memasukkannya ke dalam ketuhar pengering. Setelah dibakar, ia mesti dikeluarkan secara bergiliran. Tindakan ini perlu diulang. T

Yang ketiga adalah suhu tinggi produk selepas pengeringan. Pengendali mempunyai kemungkinan hangus. Jadi ia lebih berbahaya.

In order to overcome these shortcomings, ia memerlukan percetakan skrin pengering tali sawat.

How does T-shirts conveyor dryer work?

By setting up a mesh belt conveyor in the oven, it can make the screen printed products dry automatically. When use t shirt conveyor dryer, place the screen-printed products on the conveyor line. The mesh belt will transport products to screen conveyor dryer for baking. The exhaust gas from the drying process is discharged through the exhaust outlet. Akhirnya, the dried product is moved through the mesh belt to the exit zone.

This conveyor belt dryer screen printing uses the infrared heating lamp. Sebagai tambahan, the wind impeller can make the heat air to spread quickly throughout the oven. The temperature in the screen conveyor dryer is even. Selain itu, the thermostat can precisely control the temperature of t-shirts conveyor dryer. Oleh itu, this will ensure baking quality.

Technical specification of this conveyor belt dryer screen printing

Catatan baik: we can customize the conveyor belt dryer screen printing as customers’ specific sizes & keperluan.

Characteristics of infrared screen conveyor dryer

1. Tunnel dryer screen printing adopts hot air circulation method (convection heating). The temperature inside the oven is uniform. Selain itu, it heats up quickly.

2. The conveyor belt dryer screen printing is with a thermostat. So customer can adjust the temperature freely. Oleh itu, it can adapt to the baking of different screen printing products.

3. The mesh belt conveyor is equipped with inverter. So you can adjust the running rate according to the actual needs. Akhirnya, it can control the drying time.

4. The tunnel t shirt conveyor dryer oven is filled with insulation cotton, which can effectively reduce heat dissipation.

5. This screen conveyor dryer is with adjustable end shield. Not only easy to feed and discharge, but also can block the diffusion of heat and ink vapor. So it can reduce the harm of ink vapor to human body.

How to operate the t shirt conveyor dryer rightly?

Before operating screen conveyor dryer, pls check the following items:

1. check whether flammable and explosive materials are above and near the conveyor belt dryer screen printing;

2. check whether the wind impeller is operating normally.

3. and check if the dryer mesh belt is running normally.

4. if it is a new conveyor dryer, it is best to test it firstly. This determines the best drying temperature and time.

Use the tunnel dryer screen printing:

After confirming that there is no abnormality in the drying oven, turn on the power switch. Then operate the control cabinet.

Seterusnya, turn on the start general switch — conveyor switch — heating switch — wind motor switch in turn.

After the conveyor furnace heating normally, operators should immediately check the air motor switch for abnormalities.

Set the mesh belt dryer temperature according to the product requirements. Pada masa yang sama, set the belt conveyor speed.

Operators should frequently inspect the working condition of screen conveyor dryer.

Remember not to put your hand on the chain or gear part when the t shirt conveyor dryer is running.

Catatan baik:

Check the heat tubes of conveyor belt dryer screen printing daily to make sure it is normal.

Sebagai tambahan, every 2 hari, use the thermometer to test whether the temperature is normal.

Take care to keep the screen t shirt conveyor dryer bersih.