Divvirzienu mini mazo lentu konveijers ar ārēju motoru

Apraksts

Šis miniatūrs konveijers ir divvirzienu maza konveijera lente. Pirmkārt, līdzīgs zobsiksnas konveijeram, šo mikro konveijers ir divas jostas preču pārvadāšanai. Patiesībā, šo mikro konveijera lente ir paredzēts mūsu krievu klientam. Divkanālu mini konveijera pielietojums paredzēts ķieģeļu būvētavai. Uz mazās konveijera sistēmas ir divas koka plaukti. Tad robots paķer un uzliek ķieģeļus uz koka plauktiem. Tātad šī miniatūra konveijera lente izstumj koka bagāžniekus & ķieģeļi no viņu robotu zonas. As the mini conveyor ražotājs, mēs varam izstrādāt un ražot daudzu veidu mazas konveijera mašīnas kā klientus’ prasības.

It will be hanged ( without legs ) on robot frame. Besides it has 2 channels ( for working with left and right robot-half ). And it needs to use thick materials to be strong enough for transport wooden racks 50 kg. Customer said their brick factory and environment is very dusty.

The Design Features of This Miniature Conveyor Belt:

1. Pirmkārt, ir divas konveijera lentes. Tātad tas nedaudz atšķiras no parastās konveijera mašīnas.

2. Otrkārt, motora turēšanai ir uzstādīšanas stiprinājums. Tā kā viņu aprīkojumam ir ierobežotas vietas, motors ir ārējs lielā attālumā.

3. Treškārt, jo pārvadātās preces ir smagas, we use 5mm thickness rubber belts and 3mm thickess frame. Tādējādi, tas ir izturīgāks un kalpo ilgāk.

4. Tad, arī augsto nesošo prasību dēļ, konveijera apakšpusē ir sametinātas divas tērauda plāksnes.

5. Visbeidzot, the most parts are connected each other by bolts. So it’s easy to install and maintainan the small conveyor belt.

Šīs mikrokonveijera lentes tehniskie parametri:

1. Miniature conveyor length: 810mm, and belt width: 200mm;
2. Small conveyor belt: 5mm thickness black rubber belt;
3. Frame and brackets material: krāsots oglekļa tērauds;
4. Load-bearing capacity: 50KG for each micro conveyor belt;
5. Motors: CPG brand 400W gear motor with speed controller;
6. Mini conveyor speed: 0.5m/s;
7. Motor bracket height: 600mm;
8. The drive chain is protected by a conver;
9. The driving roller: φ50mm seamless steel roller with textures, and driven roller is also φ50mm seamless steel roller.
10. Support plate: there are two bent galvanized sheets under the two belts. Turklāt, there are two 3mm thickness steel plates under the miniature conveyor.

How does this miniature conveyor work?

Patiesībā, the working principle of this micro belt conveyor is similar to other small conveyor belts. Galvenokārt, the external motor drive the transmission chain. The only difference is that the chain does not directly drive the driving roller. Instead, it directly drives the shaft in the middle of the two micro conveyor belts. The shaft connects two bearing seats. Because the bearing seats connect two driving roller, the shaft can drive the two rollers. And then two driving rollers make the two belts run at the same time. You can adjust the conveyor speed.

Why it needs the driving roller with texture?

Miniature conveyor belt often has the phenomenon of belt slippage. So in order to avoid it, it uses this kind of rollers. The texture on the roller surface can increase friction. Then it can avoid belt slipping. Turklāt, the support plate under the belts can also increase friction. When designing and using micro conveyors, we must avoid belt slippage. Citādi, the belt is prone to wear or breakage. Eventually it will affect the normal operation of the conveyor.

FAQ

Q1: Are your miniature conveyor belt strong?
A1: Protams. In order to ensure its durability, we uses 5mm thickness rubber belt. And the frame uses 3mm thickness steel. It’s thicker than normal mini conveyor.

Q2: How to adjust belt tension?
A2: There are tension adjustment mechanisms on the two sides of the micro conveyor. They connect the two driven rollers. When adjusting, it can change the roller distance, so it can achieve to adjust belt tension.

Q3: How do I solve the problem of belt deviation of small conveyor?
A3: It’s same to adjust belt tension. If the belt deviation occurs at the lelft side, then adjust the left tension adjustment mechanism.

Q4: How long is the warranty time of your mini conveyor?
Q5: The warranty time of our miniatūrs konveijers belt is one year.