2.5m Length Conveyor Belt Dryer for Screen Printing

Description

After we printing T-shirts, it needs to dry it. Ink is a liquid and is fluid until it dries. Natural drying methods tend to be slower. For printing industry, we usually use the t shirt conveyor dryer. In mass production, screen conveyor dryer can bake clothes quickly. So it greatly improves production efficiency.

Conveyor belt dryer screen printing is a kind of tunnel furnace oven. The screen conveyor dryer includes the mesh belt conveyor and heating oven. It can not only act as t shirt conveyor dryer, but also to dry other screen printing products. For example, we usually use this infrared mesh belt dryer to dry glass and plastic.

Do you need a conveyor dryer for screen printing?

If bake screen printing products in the dryer oven, there will be the following problems:

Firstly, low capacity. Take the glass panel as an example. With the oven can be put 6 layers, each layer of 22 pieces. Drying temperature should reach 180 degrees. The minimum heating time is 35 minutes. 8 hours of non-stop work can only bake 1716 pieces of products.

Secondly, the workload is large. The operator needs to fill a layer and then put it into the dryer oven. After baking, it has to be taken out in turn. These actions need to be repeated. T

The third is the high temperature of the products after drying. The operator has the possibility of being scalded. So it is more dangerous.

In order to overcome these shortcomings, it needs a conveyor belt dryer screen printing.

How does T-shirts conveyor dryer work?

By setting up a mesh belt conveyor in the oven, it can make the screen printed products dry automatically. When use t shirt conveyor dryer, place the screen-printed products on the conveyor line. The mesh belt will transport products to screen conveyor dryer for baking. The exhaust gas from the drying process is discharged through the exhaust outlet. Finally, the dried product is moved through the mesh belt to the exit zone.

This conveyor belt dryer screen printing uses the infrared heating lamp. In addition, the wind impeller can make the heat air to spread quickly throughout the oven. The temperature in the screen conveyor dryer is even. Besides, the thermostat can precisely control the temperature of t-shirts conveyor dryer. Thus, this will ensure baking quality.

Technical specification of this conveyor belt dryer screen printing

Kind note: we can customize the conveyor belt dryer screen printing as customers’ specific sizes & requirements.

Characteristics of infrared screen conveyor dryer

1. Tunnel dryer screen printing adopts hot air circulation method (convection heating). The temperature inside the oven is uniform. Besides, it heats up quickly.

2. The conveyor belt dryer screen printing is with a thermostat. So customer can adjust the temperature freely. Therefore, it can adapt to the baking of different screen printing products.

3. The mesh belt conveyor is equipped with inverter. So you can adjust the running rate according to the actual needs. Finally, it can control the drying time.

4. The tunnel t shirt conveyor dryer oven is filled with insulation cotton, which can effectively reduce heat dissipation.

5. This screen conveyor dryer is with adjustable end shield. Not only easy to feed and discharge, but also can block the diffusion of heat and ink vapor. So it can reduce the harm of ink vapor to human body.

How to operate the t shirt conveyor dryer rightly?

Before operating screen conveyor dryer, pls check the following items:

1. check whether flammable and explosive materials are above and near the conveyor belt dryer screen printing;

2. check whether the wind impeller is operating normally.

3. and check if the dryer mesh belt is running normally.

4. if it is a new conveyor dryer, it is best to test it firstly. This determines the best drying temperature and time.

Use the tunnel dryer screen printing:

After confirming that there is no abnormality in the drying oven, turn on the power switch. Then operate the control cabinet.

Next, turn on the start general switch — conveyor switch — heating switch — wind motor switch in turn.

After the conveyor furnace heating normally, operators should immediately check the air motor switch for abnormalities.

Set the mesh belt dryer temperature according to the product requirements. At the same time, set the belt conveyor speed.

Operators should frequently inspect the working condition of screen conveyor dryer.

Remember not to put your hand on the chain or gear part when the t shirt conveyor dryer is running.

Kind note:

Check the heat tubes of conveyor belt dryer screen printing daily to make sure it is normal.

In addition, every 2 days, use the thermometer to test whether the temperature is normal.

Take care to keep the screen t shirt conveyor dryer clean.